Hughes AN6-098P Installing a J-typeradio assembly, Chapter, This chapter includes

Chapter 4

Installing a J-type radio assembly

This chapter applies to the J-type radio assembly only. If you are installing a cradle-type radio assembly, go to Chapter 5 – Installing a cradle-type radio assembly, on page 43.

This chapter includes:

•Installing a shim for vertical transmit polarization on page 32

•Installing the radio assembly on page 36

CAUTION

•Do not remove the protective packing material from the feed horn window until installation of the radio assembly is complete.

•Do not remove the protective covering from the small end of the feed horn until you are ready to attach the waveguide transition.

•Be careful not to damage the feed horn window. Do not touch the plastic film.

Chapter 4 • Installing a J-type radio assembly 1037312-0001 Revision A

31