Power ON and OFFUse the following instructions to power on your PiranhaMAX unit:

•Power On: Press the POWER/MENU key until the PiranhaMAX powers on, then release the key.

•Start-Up Menu: When the PiranhaMAX powers on, the Start-Up menu temporarily appears. From this menu, select either Normal or Simulator.

•For on the water use, select Normal.•To learn how to use the system with simulated data, select Simulator.

•Power Off: Press and hold the POWER/MENU key until the unit powers off.

NOTE: International units powered on for the first time will first display setup menu options such as Language, Units - Distance, Units - Speed, etc. for initial system setup.

NOTE: If Simulator Mode is selected from the Start-Up Menu and a transducer is plugged in, some menu setting changes will be saved in memory even after the unit is powered down. Menu setting changes will not be saved when a transducer is not connected.

To Make a Selection from the Start-Up Menu:

1.Press the UP or DOWN Arrow key to select Normal or Simulator.

2.Press the CHECK/ENTER key to confirm your selection.

NOTE: See Key Functions and How to Use the Menu System for more information.

35

Power ON and OFF