1. Assemble the Control Head Base

Your control head base will have a tilt and swivel mount. See the instructions below to assemble and mount the control head base.

Tilt and Swivel Mount

Control Head Base Assembly

Mount Arms

Base

Swivel

Ring

Countersink

Side Out

Arm Screws, 4 #6 x7/16"

Figure 28

To assemble a tilt and swivel mount:

1.Insert the mount arms into the base. Then, hold the mount arms in place as you turn the base upside down.

2.Insert the swivel ring into the base, with the countersink holes for the arm screws facing out.

3.Secure the mount arms with the four #6 screws provided (Figure 28). Hand tighten only!

21PiranhaMAX Portable Case Assembly