5. Attach the Control Head to the Base
Follow these steps to attach the control head to the
NOTE: The transducer cable and power cable should be routed prior to securing the mounting bracket to the deck.
1.Apply
2.Place the mounting bracket on the mounting surface, aligning with the drilled holes.
3.Insert the four #8 Phillips countersink wood screws into the mounting holes. Hand tighten only!
Pivot Knuckle
Thumbknob Bolt
Gimbal Knob
Mounting Holes
Figure 7
4.Insert the thumbknob bolt through the pivot knuckle on the control head (Figure 7).
Fixed Control Head Installation | 6 |