Cables Routed Behind Mounting Bracket
1
3
2
1Gimbal Bracket
2Grommet
3Hole Cover
9.Insert cable connectors into the proper recesses on the cable collector insert. The cable connectors are keyed to prevent reverse installation, so be careful not to force the connectors into the wrong slots. If you don’t have a cable for every hole in the insert, install the blank plugs to protect the control head from the weather.
1Power
2Temp/Speed
3Communications/GPS
4Transducer
5Cable Collector Insert
1
3
1 
2 
3 
4
5
2
4
5
1 Cable Collector Insert
2 Screws
3 Cable Collector Cover
4 Tab on Insert
5 Slot on Cover
Installation - Gimbal Mount | 10 |