Simulator

Use Simulator to learn how to use your Fishfinder before taking your boat on the water. The Simulator is a very powerful tool that provides a randomly- updated display which simulates on the water operation.

Simulator

We recommend going through this manual while using the Simulator, since all of the menus function and affect the display in the same way as they would in Normal operation. Any menu changes you make will be saved for later use.

•A message will appear often on the display to indicate Simulator mode.

•To exit Simulator, power off your Fishfinder.

NOTE: It is important to select Simulator manually from the Start-Up Options Menu as opposed to letting the Fishfinder enter Simulator automatically (as it will if a transducer is not connected and you do nothing during power up).

System Status

Use System Status to view system connections and to conduct a unit self- test.

After you select System Status from the Start-Up Options Menu, press the VIEW key to display the following options:

•Self Test

•Accessory Test

•GPS Diagnostic View

To exit System Status, power off your Fishfinder.

Self Test displays results from the internal diagnostic self test, including unit serial number, Printed Circuit Board (PCB) serial number, software revision, total hours of operation, and the input voltage.

Self Test Screen

83

Start-Up Options Menu