Press the INFO key while in Bird's Eye, Chart, or Combo View to display information about objects that are near an active cursor. If the cursor is not active, the Chart Info submenu will be displayed. See Views: Viewing Cartography for more information.
NOTE: Your control head will have one of the INFO keys shown here. Both keys function in the same way.
MARK KeyPress the MARK key while in any view to mark the position of a waypoint. The MARK key function is available if the GPS receiver connected.
•Active Cursor: The waypoint will be marked at the cursor location.
•Without Active Cursor: The waypoint will be marked at the boat location.
•If Screen Snapshot is active, a waypoint will be created, and a screen snapshot will also be saved to the
NOTE: If Screen Snapshot is enabled but there is not a GPS receiver connected, pressing the MARK key will capture the screen image and display an error saying that a GPS position fix is required to create a waypoint.
NOTE: You must have an
The GOTO key has multiple functions, which depend on the situation.
•Active Cursor: Press the GOTO key while in any view to create a waypoint and start navigation towards that waypoint.
•Without Active Cursor: Press the GOTO key to display the saved waypoints list, and then highlight a waypoint. Press the RIGHT Cursor key to begin navigation.
•Man Overboard: Press and hold the GOTO key for more than 1.5 seconds to activate the Man Overboard (MOB) function. Once MOB is activated, any current navigation will be cancelled and the current route will be discarded without notification (see Man Overboard (MOB) Navigation).
ZOOMThe Zoom keys function in different ways which depend on the view displayed.
•Navigation Views or the Sonar Zoom View: Press the +/- ZOOM key to change the scale of the view to appear closer or farther away.
•Side Imaging® View: Press the - or + ZOOM keys to change the scale of the view. The cursor must be active for zoom to work in the Side Imaging® View.
Key Functions | 42 |