POSITION FORMAT
(Advanced)
Position Format selects the format of the latitude and longitude position display. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)
To change the Position Format setting:
1.Make sure you are in Advanced User Mode, then highlight Position Format on the Setup menu.
2.Use the LEFT or RIGHT
TIME FORMAT
(Advanced, International only)
Time Format changes the time format used by the unit This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.) International models only. Time Format selects a 12 hour or 24 hour format for the time of day displayed when Time + Date is selected as a Digital Readout on the Sonar View (see Select Readouts).
To change the Time Format:
1.Make sure you are in Advanced User Mode, then highlight Time Format on the Setup menu.
2.Use the LEFT or RIGHT
DATE FORMAT
(Advanced, International only)
Date Format changes the date format used by the unit This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.) International models only. Date Format selects the format for the date display when Time + Date is selected as a Digital Readout on the Sonar View. (see Select Readouts).
To change the Date Format:
1.Make sure you are in Advanced User Mode, then highlight Date Format on the Setup menu.
2.Use the LEFT or RIGHT
NMEA OUTPUT
(Advanced)
NMEA Output turns the NMEA output on or off. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)
The following NMEA sentences are output:
DPT- Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
76
