Humminbird 531374-1_A manual 3D Sonar X-PRESS Menu, 3D Sonar X-Press Menu

www531374..reelsche-1 A - 947 Man.qxd 2/15/2005matic7:54..coPM Pagem55

3D SONAR X-PRESS™ MENU

(3D Sonar Views only)

The 3D Sonar X-Press™ Menu provides access to the settings most frequently used. Press the MENU key once while in any of the 3D Sonar Views to access the 3D Sonar X-Press™ Menu.

NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode or whether a 2D or a 3D View is currently displayed/active.

3D Sonar X-Press™ Menu

ACTIVE SIDE

Active Side allows you to select which side of a Combo View will be active; key presses will only affect the active side of the screen. When a menu is displayed, the non-active side of the screen will be grayed out; at any other time, a green arrow will point to the active side. Combo Views usually display sonar on the left, with charts or Bird’s Eye usually on the right. The Active Side menu choice is only available when a Combo View is active.

To select the Active Side:

1.Highlight Active Side on the 3D Sonar X-Press™ Menu.

2.Use the RIGHT 4-WAY Cursor Control key to change which side is active. (Left, Right, Default = Left, or Sonar).

SPLIT POSITION

Split Position allows you to adjust what percentage of the screen is taken up by the left side of any Combo View; each view may be adjusted independently; you must be in a specific view to adjust the screen size for that view. The number setting indicates the percentage taken up by the left side of the Combo View; selecting Left sets the left side of the screen to its smallest setting. The Split Position menu choice is only available when a Combo View is active.

To Adjust Split Screen Position

1.Highlight Split Position on the 3D Sonar X-Press™ Menu.

2.Use the RIGHT 4-WAY Cursor Control key to change the size of the left side of a Combo View. (Left,30, 40, 50, 60, 70, Right, Default = 50)

50