Manuals / Hunter Fan / Lawn and Garden / Outdoor Ceiling Fan

Hunter Fan operation manual Attaching The Canopy, Refer to Figure, 41462-01 10/14/2005

Models: 41462-01

1 26

Download 26 pages 17.21 Kb

Page 14

Image 14

STEP 6 - ATTACHING THE CANOPY

Refer to Figure 6.

1.Raise the canopy and align the holesinthecanopywiththeholes in the ceiling plate.

2.Install and tighten the three canopy screws.

Figure 6 - Attaching Canopy to Ceiling

Plate

41462-01 10/14/2005

Page 14

Image 14

Hunter Fan 41462-01 operation manual Attaching The Canopy, Refer to Figure, Install and tighten the three canopy screws

Contents

Installationand Operation Manual For Hunter Ceiling Fans 41462-01 10/14/200541462-01 10/14/2005 Attach Your Receipt or a Copy of Your Receipt Here Model Name Catalog No Serial No Date Purchased Where PurchasedCONGRATULATIONS Step 8 - Attaching The Switch Housing CONTENTSStep 5 - Wiring The Fan Step 9 - Remote ControlIdentify and connect electrical wires Lift 40 pounds To install a ceiling fan, be sure you can do the followingDrill holes for and install wood screws IMPORTANT INFORMATIONGATHERING THE TOOLS You will need the following tools for installing the fanSTEP 1 - GETTING READY Electric drill with 9/64 bit Standard screwdriver1512.65 Angle Mounting Figure 1b hangs from a vaulted or angled ceil- ing29 Max PitchSTEP 2 - INSTALLING THE CEILING PLATE Isolators Ceiling Plate Figure 2a - Adding Isolators to Ceiling PlateFigure 2b - Correct Position of Ceiling Plate for Angle Mounting STEP 3 - ASSEMBLING THE FAN Pipe Hanger Bracket Canopy Allen Head Pipe Set ScrewSTEP 4 - HANGING THE FAN STEP 5 - WIRING THE FAN CONNECTING FAN TO ELECTRI- CAL SOURCEOutlet Box Ceiling Plate Power Black Wires In White Ceiling Bare or Green 2 x 4 Brace GreenApproved Connectors WhiteRefer to Figure 2. Install and tighten the three canopy screwsSTEP 6 - ATTACHING THE CANOPY 41462-01 10/14/2005Figure 7c - Attaching Blade Iron Assembly to Motor STEP 7 - ASSEMBLING FAN BLADESBlade Bracket Cover Plate Blade Bracket Assembly Screws Decorative Screw Blade Iron Barrel NutSTEP 8 - ATTACHING THE SWITCH HOUSING ATTACHING THE UPPER SWITCH HOUSINGATTACHING THE LOWER SWITCH HOUSING INSTALLING ACCESSORY LIGHT KITSROCKER LIGHT SWITCH STEP 9 - REMOTE CONTROLREMOTE CRADLE INSTALLATION STANDARD LIGHT SWITCH WALL INSTALLATION4. Replace the battery and cover BATTERY INSTALLATIONDIP SWITCH SETTING Figure 9dFAN CONTROL Refer to Figure 9f for identification of controlbuttons POWER FAILUREIf the fan is not functioning af- ter installation To turn off the fan. Press the FAN OFF buttonFCC INFORMATION LIGHT CONTROLAUTO RESUME causing a draft 1. Turn on electrical power to the fan2. Refer to the STEP 9 - REMOTE CONTROL, for operation OPERATING YOUR HUNTER FANCLEANING AND MAINTENANCE MANUFACTURERS PHONE NUMBER1. Power turned off, fuse blown, or circuit breaker tripped TROUBLESHOOTINGPROBLEM 2. Loose wire connections or wrong connections6. Switch housing is loose SOLUTION5. Optional Light Kit is not properly installed Noisy operationReplace with alkaline battery Remote battery life seems shortNot using alkaline batteries Battery too weak