®
STEP 2 - INSTALLING THE CEILING PLATE
WARNING
•To avoid possible electrical shock, before wiring fan, disconnect power by turn- ing off the circuit breakers both to the outlet box and toitsassociatedwallswitch location. If you cannot lock the circuit breakers in the offposition,securelyfasten a prominent warning de- vice, such as a tag, to the servicepanel.
1.Drilltwopilotholesintothewood support structure through the outermost holes on the outlet box. The pilot holes should be 9/64" in diameter by 2 3/4" in depth.
2.Thread the lead wires from the outlet box through the hole in the middle of the ceiling plate.
3.Position the three isolators be- tween the ceiling plate and ceil- ing by inserting the raised areas on each isolator into the holes in the ceiling plate. Refer to Figure 2a.
4.Align the slotted holes in the ceil- ing plate with the pilot holes in the wood support structure. Note: The isolation pads should be flush against the ceiling.
Isolators
Ceiling
Plate
Figure 2a - Adding Isolators to Ceiling Plate
8