Manuals / Hunter Fan / Lawn and Garden / Outdoor Ceiling Fan

Hunter Fan 41462-01 Remote battery life seems short, Not using alkaline batteries, Problem

Models: 41462-01

1 26

Page 26

PROBLEM	PROBABLE CAUSE	SOLUTION
Remote battery life seems short.	Not using alkaline batteries.	Replace with alkaline battery.

Remote operates only at close range.	Battery too weak.	Replace with new alkaline battery,
		type 23A, MN-21 or equivalent.

Inconsistent Remote operation.	1.	RF interference.
	2.	Continuing RF interference.

1.Turn OFF wall switch for 5 sec- onds, then turn back ON.

2.Change DIP switch settings to a different code. Follow complete DIP switch change steps found in STEP 9 - REMOTE CONTROL, sub step DIP SWITCH SETTING.

If you have tried these troubleshooting solutions and still have trouble, call 901-248-2222 or visit our Web site at http://www.hunterfan.com.

41462-01 10/14/2005

Page 26

Image 26

Hunter Fan 41462-01 Remote battery life seems short, Not using alkaline batteries, Replace with alkaline battery, Problem

Contents

Installationand Operation Manual For Hunter Ceiling Fans 41462-01 10/14/200541462-01 10/14/2005 Attach Your Receipt or a Copy of Your Receipt Here Model Name Catalog No Serial No Date Purchased Where PurchasedCONGRATULATIONS Step 8 - Attaching The Switch Housing CONTENTSStep 5 - Wiring The Fan Step 9 - Remote ControlIdentify and connect electrical wires Lift 40 pounds To install a ceiling fan, be sure you can do the followingDrill holes for and install wood screws IMPORTANT INFORMATIONGATHERING THE TOOLS You will need the following tools for installing the fanSTEP 1 - GETTING READY Electric drill with 9/64 bit Standard screwdriver1512.65 Angle Mounting Figure 1b hangs from a vaulted or angled ceil- ing29 Max PitchSTEP 2 - INSTALLING THE CEILING PLATE Isolators Ceiling Plate Figure 2a - Adding Isolators to Ceiling PlateFigure 2b - Correct Position of Ceiling Plate for Angle Mounting STEP 3 - ASSEMBLING THE FAN Pipe Hanger Bracket Canopy Allen Head Pipe Set ScrewSTEP 4 - HANGING THE FAN STEP 5 - WIRING THE FAN CONNECTING FAN TO ELECTRI- CAL SOURCEOutlet Box Ceiling Plate Power Black Wires In White Ceiling Bare or Green 2 x 4 Brace GreenApproved Connectors WhiteRefer to Figure 2. Install and tighten the three canopy screwsSTEP 6 - ATTACHING THE CANOPY 41462-01 10/14/2005Figure 7c - Attaching Blade Iron Assembly to Motor STEP 7 - ASSEMBLING FAN BLADESBlade Bracket Cover Plate Blade Bracket Assembly Screws Decorative Screw Blade Iron Barrel NutSTEP 8 - ATTACHING THE SWITCH HOUSING ATTACHING THE UPPER SWITCH HOUSINGATTACHING THE LOWER SWITCH HOUSING INSTALLING ACCESSORY LIGHT KITSROCKER LIGHT SWITCH STEP 9 - REMOTE CONTROLREMOTE CRADLE INSTALLATION STANDARD LIGHT SWITCH WALL INSTALLATION4. Replace the battery and cover BATTERY INSTALLATIONDIP SWITCH SETTING Figure 9dFAN CONTROL Refer to Figure 9f for identification of controlbuttons POWER FAILUREIf the fan is not functioning af- ter installation To turn off the fan. Press the FAN OFF buttonFCC INFORMATION LIGHT CONTROLAUTO RESUME causing a draft 1. Turn on electrical power to the fan2. Refer to the STEP 9 - REMOTE CONTROL, for operation OPERATING YOUR HUNTER FANCLEANING AND MAINTENANCE MANUFACTURERS PHONE NUMBER1. Power turned off, fuse blown, or circuit breaker tripped TROUBLESHOOTINGPROBLEM 2. Loose wire connections or wrong connections6. Switch housing is loose SOLUTION5. Optional Light Kit is not properly installed Noisy operationReplace with alkaline battery Remote battery life seems shortNot using alkaline batteries Battery too weak

Remote battery life seems short.

Not using alkaline batteries.

Replace with alkaline battery.

Battery too weak.

type 23A, MN-21 or equivalent.

Inconsistent Remote operation.

RF interference.

1.Turn OFF wall switch for 5 sec- onds, then turn back ON.