Unpacking
1.Remove unit from carton and discard all packaging. NOTE: Save all parts bags.
Assemble Hose
1.Assemble hose to air outlet. IMPORTANT: The hex fitting on the air outlet MUST be held in place with a wrench when tightening hose onto air outlet.
Assemble Accessories
The unit is supplied with an accessory kit and inflator/deflator kit, choose the accessory needed.
Assemble Accessory Kit
ga
Safety Nozzle
2.Assemble the safety nozzle (d), tapered inflator (g), rubber blow gun tip (h), or blow gun adapter
(e) to blow gun. NOTE: To use the inflating needle (f) the blow gun adapter has to be assembled to blow gun.
3.Attach the inflating needle (f) to the blow gun adapter on the blow gun.
Assemble Inflator/Deflator Kit
h
j
e
k | c |
|
The blow gun (c) and blow gun adapter (e) from the accessory kit is
f e
b
needed to use the inflator/deflator kit.
c
h
d
To Assemble Female Tire Chuck
1.Assemble female tire chuck (a) to hose (b) and tighten securely with wrenches.
To Assemble Accessories
1.Attach the blow gun (c) to hose (b).
Risk of unsafe operation. If an
accessory is not being used with the blow gun, the safety nozzle MUST be assembled.
1.Attach the blow gun to hose.
2.Attach blow gun adapter to blow gun.
3.Attach the inflating needle (h), tapered nozzle (j), or high flow inflator/deflator body (k) to the blow gun adapter on the blow gun.
4.If using the inflator/deflator choose the nozzle needed and see the "How to use High Flow Inflator/Deflator Adapter Body" instructions in the Operation section for the correct procedure.
9- ENG | A05051 |
