3.INSTALLATION
3.4Installation of the boundary wire
The boundary wire can be installed in one of the following ways:
•Securing the wire to the ground with staples.
It is preferable to staple down the boundary cable, if you want to make adjustments to the boundary wire during the first few weeks of operation.
•Bury the wire.
It is preferable to bury the boundary wire if you want to dethatch or aerate the lawn.
If necessary both methods can be combined so one part of the boundary wire is stapled down and the remainder is buried.
Best position for the boundary wire
The boundary wire should be laid so it:
•Forms a loop around the working area for Automower. Only an original boundary wire must be used. This is tinned and has a high quality insulation to withstand the dampness in the ground.
•Is a maximum of 350 metres long.
•Maintains a maximum distance of 25 metres from Automower in the entire working area.
•The boundary wire is laid at different distances from obstacles depending on what the working area borders. The picture below shows how the boundary wire should be routed around the working area and around obstacles.
English - 19 |
