Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna 210 C Maintenance, Unscrew the blade. Use a straight slot or cross-tip screwdriver

Models: 210 C

1 48

Download 48 pages 61.71 Kb

Page 39

Image 39

7. MAINTENANCE

5.Unscrew the blade. Use a straight slot or cross-tip screwdriver.

3012-260

6.Pry apart the skid plate and blade disc a little and remove the blade and screw.

7.Screw tight the new blade.

40 - English

Page 39

Image 39

Husqvarna 210 C Maintenance, Unscrew the blade. Use a straight slot or cross-tip screwdriver, Screw tight the new blade

Contents

HUSQVARNA AUTOMOWER 210 C OPERATOR’S MANUAL TABLE OF CONTENTS 4 - English TABLE OF CONTENTSIMPORTANT INFORMATION 1. Introduction and safety1. INTRODUCTION AND SAFETY 1.1 Introduction1. INTRODUCTION AND SAFETY 1.2 Symbols on Automower1. INTRODUCTION AND SAFETY 1.3 Symbols in the Operator’s ManualXxxxxx xxxxx xxxx xxxx xxxxx IMPORTANT INFORMATION Xxxxxx xxxxx xxxx xxxx xxxxx1. INTRODUCTION AND SAFETY 1.4 Safety instructionsMaintenance Transport1. INTRODUCTION AND SAFETY 2. PRESENTATION 2. Presentation2.1 Automower, what’s what? 2. PRESENTATIONThe numbers in the picture correspond to 2. PRESENTATION 2.2 Function of AutomowerCapacity Mowing technique3012-422 2. PRESENTATION2. PRESENTATION Working method2.3 One Automower in several gardens Movement pattern2. PRESENTATION 3. Installation 3. INSTALLATIONCarry out the installation in the following steps 3.2 Installation of the loop generator/charger 3.1 Preparations3. INSTALLATION 3. INSTALLATION 3.3 Charging the batteryInstallation and connecting the loop generator/charger Automower cannot be used before the installation is complete3.4 Installation of the boundary wire Best position for the boundary wire3. INSTALLATION 3. INSTALLATION 30 cmBoundaries for the working area 10 cm3. INSTALLATION Boundaries within the working areaSecondary areas Slopes3. INSTALLATION Laying out the boundary wire 3. INSTALLATIONIMPORTANT INFORMATION 3. INSTALLATION Laying the boundary wire in towards the loop generator/chargeris not a satisfactory splice. Soil moisture will Joining the boundary wireTwisted cables, or a screw terminal chock-block, insulated with insulation tape3. INSTALLATION 3.5 Connecting the boundary wire3.6 Checking the installation 3.7 Linking Automower to the loop generator/charger3. INSTALLATION 4.1 Starting Automower Read the safety instructions before you start your Automower4. Use 4. USE4. USE 4.4 Switching off Automower4.5 Adjusting the cutting height 4.3 Restart4. USE 4.6 Changing the PIN code4. USE 4.7 SoundsSound Significance5.2 Numbers 5. Control panel5. CONTROL PANEL 5.1 Select5.3 Main switch 5.4 Indicator lamps5. CONTROL PANEL 6. GARDEN EXAMPLE Proposed installationProposals for installation 6. Garden exampleProposals for installation 6. GARDEN EXAMPLEGarden with a steep incline 30 % that IMPORTANT INFORMATION 7. Maintenance7. MAINTENANCE 7.1 BatteryAutomower 7.3 Service7.4 Cleaning 7.2 Winter storageWheels IMPORTANT INFORMATION Do not use running water when cleaningUnderframe and blade disc Chassis7. MAINTENANCE Always use originalblades and screws when replacing7.5 Replacing the blades Body40 - English 7. MAINTENANCE5. Unscrew the blade. Use a straight slot or cross-tip screwdriver 7. Screw tight the new bladeFault message 8. Trouble shooting8. TROUBLE SHOOTING 8.1 Fault messagesCause 8. TROUBLE SHOOTINGFault message FlashesAction 8.2 Fault symptomSymptom Causeinformation 9. Technical data9. TECHNICAL DATA 10. EnvironmentalSerial number Personal code Dealer Dealer’s telephone number 11. EU declaration of conformity11. EU DECLARATION OF CONFORMITY EU Declaration of Conformity only applies to Europe46 - English 11. EU DECLARATION OF CONFORMITY12. INDEX 12. Index12. INDEX Use AutomowerWhat’s what Automower