Husqvarna 210 C manual Main switch, Indicator lamps, Control Panel

5. CONTROL PANEL

5.3 Main switch

4.Set the main switch in the ON position to start Automower.

Set the main switch in the OFF position when you are not using the mower or if you want to work on the blade disc.

When the main switch is set in the OFF position the motors on the mower cannot start.

5.4 Indicator lamps

The indicator lamps indicate the status of the mower. If all the lamps are out, the mower is in sleep mode. Start the mower again by switching the main switch off and on.

5.PIN code:

•The lamp is lit with a steady light: The PIN code has been entered and the mower is ready to start. Star the mower by closing the cover.

•The lamp flashes: The PIN code has not been entered. Enter the PIN code using the numerical buttons followed by the YES button.

6.Battery:

•The lamp is out: The mower is not charging and it is sufficiently charged to mow.

•The lamp is lit with a steady light: Mower charging.

•The lamp flashes: The mower needs to charge.

7.Fault:

•The lamp is out: No fault.

•The lamp flashes or is lit with a steady light: A fault means the mower can not start, see 8.1 Fault messages on page 41.

4

3012-746

5

6

7

3012-780

English - 33