2 | Electrical system |
Drive dogs
Remove the bolts.
Remove the hooks and the springs to replace them.
Mind the washer (A) so as not to lose it.
Replace damaged parts.
Assemble in the reverse order.
502 50 18-01
Assembly
Check the key groove in the crankshaft and key in the flywheel. If damaged the components must be replaced.
Attach the ignition module and then the flywheel.
Check the air gap, see page 9.
0.3
502 51
Drive dogs
The drive dogs can be easily replaced if they are damaged.
Remove the bolts, the hooks and the springs.
Mind the washer (A) so as not to lose it.
Replace damaged parts.
Assemble in the reverse order.
Check that the hooks can be turned freely when the bolts are tight.
Assembly
Check that the key groove in the crankshaft is not damaged. If it is, the crankshaft must be replaced.
Attach the ignition module and make sure the
Check that the key in the flywheel is not damaged. If it is, the flywheel must be replaced.
Attach the flywheel.
Check the air gap, see page 9.
Heated handles
The heating element in the handles consists of ceramic plates. These are
Remove the throttle from the handle. | Remove the throttle from the handle. | ||||
In order to have access, the bolt that | See also chapter 3 “Throttle”. | ||||
holds the throttle and the cover with the | In order to remove the heating element | ||||
circuit breaker must be removed to | |||||
the bolt (A) that holds the throttle and | |||||
reach the electrical cables. | |||||
cover (B) and the heater switch must | |||||
|
|
|
| ||
|
|
|
| first be removed (2 bolts). | |
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
502 50 |
|
| |
The heating element in the throttle is | A heating element is placed in the | ||
accessed when the throttle lock is | throttle lock for involuntary throttling. | ||
pushed out of the throttle. | Press the locking catch from the | ||
Pry off the locking catch and lift out the | throttle, making sure not to lose the | ||
spring (A). | |||
heating element. | |||
| |||
|
| Pry off the locking catch (B) and lift out | |
|
| the heating element (C). | |
|
|
| |
|
| NOTE! | |
|
| Do not pry off the heating element | |
|
| before the locking catch has been | |
|
| removed. The element can be | |
|
| damaged. | |
|
|
| |
12
