MAINTENANCE

Anti-scalp Rollers

Anti-scalp rollers keep the deck in the proper position to help prevent scalping in most terrain conditions. Do not adjust the rollers to support the deck.

IMPORTANT INFORMATION

Adjust anti-scalp rollers with the mower on a flat level surface.

The anti-scalp rollers can be set in three positions:

Upper position 1 to 2½" (25 to 63 mm) grass.

Middle position 2½" to 4" (63 to 102 mm) grass.

Lower position 4" to 5" (102 to 127 mm) grass.

Deck Lift Spring

When mowing 2" or lower, it may be necessary to adjust the deck lift springs. Access the springs by tilting the seat forward.

Loosen the nut to adjust the spring tension.

IMPORTANT INFORMATION

The anti-scalp rollers must not be used for gauge wheels or the roller and deck may be damaged.

Caster Wheels

Check every 200 hours. Check that wheels rotate freely.

Removal and Installation

Remove nut and caster bolt. Pull the wheel out of the fork. Install in reverse order. Tighten caster bolt. Torque to 45 ft-lbs (61 Nm), then back nut off ½ turn.

NOTE: Tire should rotate freely but axle spacers should not.

If wheels do not rotate freely take the unit to the dealer for service.

8065-029

Anti-scalp rollers

8065-062

Deck lift spring

2

1

8065-030

1.Caster bolt

2.Axle spacer Caster wheel

49

Page 49
Image 49
Husqvarna PZ29D CE, 966616701 manual Caster Wheels, Anti-scalp Rollers, Deck Lift Spring, Removal and Installation

PZ29D CE, 966616701 specifications

The Husqvarna 966616701, PZ29D CE, stands out as a premier choice among professional-grade zero-turn mowers, designed to cater to the needs of both landscape professionals and avid homeowners. Known for its powerful performance and innovative technology, the PZ29D CE showcases impressive features that enhance efficiency and durability.

At the heart of the PZ29D CE is a robust engine capable of delivering high power output, allowing users to tackle tough mowing tasks with ease. Typically equipped with a reliable Kawasaki engine, this mower ensures consistent performance, reducing downtime and enhancing productivity. The engine’s design focuses on fuel efficiency without compromising power, which is crucial for extensive mowing applications.

One of the standout features of the Husqvarna PZ29D CE is its cutting deck. The mower often features a wide cutting deck that ranges from 52 to 60 inches, depending on the specific model. This breadth of cutting gets the job done quickly, allowing operators to cover large areas in a short time. Additionally, the deck design often incorporates advanced air flow technology that can produce a clean and even cut, even in varied grass conditions.

The zero-turn capability of the PZ29D CE enhances maneuverability significantly, allowing for tight turns and easy navigation around obstacles. This feature is essential for professional landscapers who need to maintain precision while working around trees, flower beds, and fences. The intuitive controls make it easy for users to handle the mower, ensuring a smooth operational experience.

Comfort is also a priority in the design of the PZ29D CE. The plush, adjustable seat provides ample support during long hours of mowing, while the ergonomic control layout minimizes fatigue for the operator. This design consideration is vital for those who rely on their equipment for extended periods.

Additionally, the Husqvarna PZ29D CE incorporates features for improved safety, including roll-over protection systems and safety switches that engage when the operator leaves the seat.

In conclusion, the Husqvarna 966616701, PZ29D CE, combines powerful performance, advanced cutting technology, and operator comfort, making it a reliable and efficient choice for those seeking a high-performing zero-turn mower. Whether for commercial landscaping or residential maintenance, this model exemplifies the very best in lawn care technology.