MAINTENANCE

5.Adjust belt tension by turning the eyebolt until there is approximately 7/8" -1" of threads showing outside the nut.

6.Belt tension should be set to 60-70 lbs.

7.Replace belt shields on both mandrel housings and secure with fasteners.

Pump Belt

The pump belt is not adjustable. Replace the belt if it begins to slip from wear.

Replacing Pump Belt

Park the mower on a level surface. Engage the parking brake and disconnect negative cable from battery. Jack or hoist the rear of the unit off of the ground to access the bottom of the unit.

Belt Removal/Installation

1.Remove the skid plate and the left drive tire.

2.With a ½" breaker bar and using the square opening in the idler arm, shift the arm counter clockwise to create slack in the belt.

3.Remove belt from the engine and pump pulleys.

4.To reinstall, reverse the above procedure using the belt routing diagram located on the left rear side of the hydraulic reservoir.

8065-054

Adjust belt tension

1

2

8065-077

1.Belt routing decal

2.Idler release placement Pump belt removal

45

Page 45
Image 45
Husqvarna PZ29D CE, 966616701 manual Replacing Pump Belt, Belt Removal/Installation

PZ29D CE, 966616701 specifications

The Husqvarna 966616701, PZ29D CE, stands out as a premier choice among professional-grade zero-turn mowers, designed to cater to the needs of both landscape professionals and avid homeowners. Known for its powerful performance and innovative technology, the PZ29D CE showcases impressive features that enhance efficiency and durability.

At the heart of the PZ29D CE is a robust engine capable of delivering high power output, allowing users to tackle tough mowing tasks with ease. Typically equipped with a reliable Kawasaki engine, this mower ensures consistent performance, reducing downtime and enhancing productivity. The engine’s design focuses on fuel efficiency without compromising power, which is crucial for extensive mowing applications.

One of the standout features of the Husqvarna PZ29D CE is its cutting deck. The mower often features a wide cutting deck that ranges from 52 to 60 inches, depending on the specific model. This breadth of cutting gets the job done quickly, allowing operators to cover large areas in a short time. Additionally, the deck design often incorporates advanced air flow technology that can produce a clean and even cut, even in varied grass conditions.

The zero-turn capability of the PZ29D CE enhances maneuverability significantly, allowing for tight turns and easy navigation around obstacles. This feature is essential for professional landscapers who need to maintain precision while working around trees, flower beds, and fences. The intuitive controls make it easy for users to handle the mower, ensuring a smooth operational experience.

Comfort is also a priority in the design of the PZ29D CE. The plush, adjustable seat provides ample support during long hours of mowing, while the ergonomic control layout minimizes fatigue for the operator. This design consideration is vital for those who rely on their equipment for extended periods.

Additionally, the Husqvarna PZ29D CE incorporates features for improved safety, including roll-over protection systems and safety switches that engage when the operator leaves the seat.

In conclusion, the Husqvarna 966616701, PZ29D CE, combines powerful performance, advanced cutting technology, and operator comfort, making it a reliable and efficient choice for those seeking a high-performing zero-turn mower. Whether for commercial landscaping or residential maintenance, this model exemplifies the very best in lawn care technology.