IBM 51 manual BTC3107I System has invoked preUpdate LifecycleActivator for

System action: The bundle was not installed.

Administrator Response: Verify that the specified bundle is the one you intended to install. If you want to replace this bundle you must first uninstall it, then install the bundle again, or try updating it.

BTC3106I	The system is retrieving a
	LifecycleActivator from the bundle_name
	bundle.

Explanation: A lifecycle activator was found in the bundle and retrieved.

System action: A lifecycle activator was found in the bundle and retrieved.

BTC3107I	The system has invoked preUpdate in
	the LifecycleActivator for the
	bundle_name bundle.

Explanation: The preUpdate logic defined in the LifecycleActivator was invoked.

System action: The preUpdate logic defined in the LifecycleActivator was invoked.

BTC3108I	The system has invoked postUpdate in
	the LifecycleActivator for the
	bundle_name bundle.

Explanation: The postUpdate logic that is defined in the LifecycleActivator was invoked.

System action: The postUpdate logic that is defined in the LifecycleActivator was invoked.

BTC3109I	The system has invoked preUninstall in
	the LifecycleActivator for the
	bundle_name bundle.

Explanation: The preUninstall logic defined in the LifecycleActivator was invoked.

System action: The preUninstall logic defined in the LifecycleActivator was invoked.

BTC3110I	The system invoked postInstall in the
	LifecycleActivator for the bundle_name
	bundle.

Explanation: The postInstall logic defined in the LifecycleActivator was invoked.

System action: The postInstall logic defined in the LifecycleActivator was invoked.

BTC3111E	The system cannot read or write to the
	config/endpoint.properties file. Verify
	that the agent configuration file is on
	the file system.

Explanation: The config/endpoint.properties file does

not exist or the user account that runs the common agent does not have the correct file permissions.

Administrator Response: Verify that the file exists and that the user account has the appropriate read and write permission.

BTC3112E The system encountered an error while handling the subagent bundle count variable in endpoint.properties. Make sure it is stored in the correct numerical format.

Explanation: The subagent bundle count variable in the config/endpoint.properties file could not be interpreted.

System action: The number of subagent bundles that are installed on the system might be misrepresented.

Administrator Response: Verify that the config/endpoint.properties file exists and that the user account has the appropriate read/write permission. Make sure that the subagent bundle count variable is present in the file.

BTC3113I	The deployer service has been
	successfully deployed and started.

Explanation: No additional information is available for this message.

BTC3114I	The deployer service has been
	successfully undeployed and stopped.

Explanation: No additional information is available for this message.

BTC3115E The post installation failed.

Explanation: The postInstall logic specified in the bundle LifecycleActivator failed.

System action: The postInstall logic was not completed successfully. The bundle might not be installed correctly.

Administrator Response: If you continue to encountered problems with the bundle, attempt to uninstall and reinstall the bundle.

BTC3116E The post activity update of the bundle failed.

Explanation: postUpdate logic specified in the bundle LifecycleActivator failed.

System action: The postUpdate logic was not completed successfully. The bundle might not be updated correctly.

Administrator Response: If you continue to experience problems with the bundle, try uninstalling and reinstalling the bundle.

Chapter 11. Tivoli Common Agent Services messages 189