IBM 51 manual COPJEE032E The system cannot recognize the database type

COPJEE027E The system cannot copy credentials ID "VALUE_0" specified in stack VALUE_1 and service access point VALUE_2.

Explanation: No additional information is available for this message.

COPJEE028E The system cannot identify credentials ID "VALUE_0" specified in VALUE_1 and service access point VALUE_2.

Explanation: No additional information is available for this message.

COPJEE029E The relationship between the network interface ID "VALUE_0" and the router ID: "VALUE_1" is not valid.

Explanation: No additional information is available for this message.

COPJEE030E The system cannot delete VALUE_0 with the ID VALUE_1 because it is not in maintenance.

Explanation: No additional information is available for this message.

COPJEE031E The system cannot find the required data center model object. The object either does not exist, or exists but is not the expected object type (type VALUE_0, ID VALUE_1).

Explanation: No additional information is available for this message.

COPJEE032E The system cannot recognize the database type.

Explanation: No additional information is available for this message.

COPJEE033E The system cannot find the association between the monitoring application ID "VALUE_0" and the resource ID "VALUE_1".

Explanation: An error occurred when the system tried to update the status of a monitoring configuration that is associated with a resource.

Operator response: Verify that the resource is still associated with the monitoring configuration, and then try again.

COPJEE034E The system cannot find the password credentials "VALUE_0".

Explanation: No additional information is available for this message.

COPJEE035E The system cannot find the RSA credentials "VALUE_0".

Explanation: No additional information is available for this message.

COPJEE036E The system cannot find the SNMP credentials "VALUE_0".

Explanation: No additional information is available for this message.

COPJEE037E The system cannot find the software association between the software=VALUE_0, and the device=VALUE_1).

Explanation: No additional information is available for this message.

COPJEE038E The system cannot find the user credentials "VALUE_0".

Explanation: No additional information is available for this message.

COPJEE039E The argument (VALUE_0="VALUE_1") is not valid. Make sure that the parameter is of the right type and that it is not empty.

Explanation: No additional information is available for this message.

COPJEE040E The value of the variable VALUE_0 is not specified.

Explanation: No additional information is available for this message.

COPJEE041E There is no workflow specified for the logical device operation. The logical operation is "VALUE_0" and the device is "VALUE_1".

Explanation: No additional information is available for this message.

COPJEE042E A real IP with virtual IP ID VALUE_0 and network interface ID VALUE_1) exists already.

Explanation: No additional information is available for this message.

Chapter 10. Tivoli Intelligent Orchestrator messages 137