IBM 51 Policy engines subsystem messages, COPPEZ005E The system cannot create the Snmp connection

COPJEE381E A user interface error occurred. The configuration is incorrect for: action="VALUE_0", objectType="VALUE_1".

Explanation: No additional information is available for this message.

COPJEE382E The system can not find the VLAN in the switch port with ID: "VALUE_0".

Explanation: No additional information is available for this message.

COPJEE384E You cannot delete the user-defined report VALUE_0, because you are not its owner.

Explanation: No additional information is available for this message.

COPJEE385E You cannot delete the report definition VALUE_0, because you are not its owner.

Explanation: No additional information is available for this message.

COPJEE386E IP address VALUE_0 is already used by other network interface of this system.

Explanation: No additional information is available for this message.

COPJEE387E The system cannot create the credential since its search key VALUE_0 is already used by other credential of this access point.

Explanation: No additional information is available for this message.

COPJEE389E The report contains too many objects. Retry with fewer selections.

Explanation: No additional information is available for this message.

COPJEE390E The report contains more than VALUE_0 records. Retry with fewer selections.

Explanation: No additional information is available for this message.

COPJEE391E You are not authorized to view this report. Ask your administrator to assign you to the appropriate access permission group to be able to view the report.

Explanation: No additional information is available for this message.

Policy engines subsystem messages

COPPEZ005E The system cannot create the SNMP connection.

Explanation: No additional information is available for this message.

COPPEZ008E The system cannot estimate the

number of servers.

Operator response: Configure the Resource-poll.xml file properly.

COPPEZ009E The system cannot open the VALUE_0 file.

Explanation: No additional information is available for this message.

COPPEZ023E An error occurred because the simulator is not enabled.

Explanation: No additional information is available for this message.

COPPEZ024E An error occurred because the simulator cannot recognize the VALUE_0 application.

Explanation: No additional information is available for this message.

COPPEZ038E The VALUE_0" driver cannot load for `VALUE_1".

Explanation: No additional information is available for this message.

COPPEZ039E An exception occurred in a data acquisition driver for `VALUE_0".

Operator response: Validate the configuration of the acquisition engine.

COPPEZ040E The driver timed out during data acquisition from `VALUE_0".

Explanation: No additional information is available for this message.

150Tivoli Intelligent Orchestrator Problem Determination and Troubleshooting Guide