IBM 51 manual COPCOM521E Unable to read xml config file VALUE0

COPCOM520E Unable to parse attribute: VALUE_0 from xml config file: VALUE_1.

Explanation: No additional information is available for this message.

COPCOM521E Unable to read xml config file: VALUE_0.

Explanation: No additional information is available for this message.

COPCOM522E Incorrect MAC address: VALUE_0. A

MAC address must have 12 hex digits.

Explanation: No additional information is available for this message.

COPCOM523E The template does not indicate the software definition.

Explanation: No additional information is available for this message.

COPCOM524E Incorrect Property value position for a non array property id VALUE_0 on the position VALUE_1.

Explanation: If a property is a non-array property, it cannot create more than two property values. When using createProperty or addPropertyValue to create a new property and value, the position one will always be used. Make sure that there is no property value before adding a value entry for a non-array property

COPCOM525E Cannot find DCM Property Id VALUE_0.

Explanation: DCM Property ID does not exist

COPCOM526E Property Value ID VALUE_0 does not exist.

Explanation: The property value ID does not exist

COPCOM527E Cannot delete property value ID VALUE_0.

Explanation: The property value ID cannot be deleted if it is not an array property

COPCOM528E Cannot add property value IDVALUE_0.

Explanation: The property value ID cannot be added if it is not an array property

COPCOM529E Dynamic IP addresses are not supported because the "VALUE_0" java security property is set to "VALUE_1".

The value must be ’0’ (zero).

Explanation: The IP address caching is enabled in the JDK, so the system cannot resolve hostnames to IP addresses correctly.

COPCOM530E The software resource with the ID VALUE_0 could not be found.

Explanation: Either there is no software resource with the indicated ID or there is another object with the indicated ID that is of a different type than a software resource or its subtypes (such as Installation or Instance).

COPCOM531E There is no software resource with the ID VALUE_0 that is a member of the administrative domain with the ID VALUE_1.

Explanation: The system initiated an operation assuming that there is a software resource identified with the administrative domain ID, but there was not.

COPCOM532E The server "VALUE_0" cannot be accessed or updated.

Explanation: The MSAD server needs to be available in local network and can be accessed from the TPM server.

COPCOM533E The DCM object "VALUE_0" cannot be updated.

Explanation: The TPM data center model needs to be updated based on MS Active directory discovery results.

COPCOM534E The Software Resource with the ID "VALUE_0" has a null or empty name.

Explanation: A software resource with a null or empty name cannot be exported as part of an administrative domain. The name is used to associate the resource with the administrative domain if the XML file is imported later.

COPCOM535E The method "VALUE_0" is not defined for class "VALUE_1".

COPCOM536E The method "VALUE_0" is not supported.

Explanation: LWIOS User Factory does not support the specified method.

Chapter 10. Tivoli Intelligent Orchestrator messages 123