IBM 51 manual CTGEM0155I The recovery service started successfully, CTGEM0161I Unknown reason

application server for the recovery service.

CTGEM0155I The recovery service started successfully.

Explanation: No additional information is available for this message.

CTGEM0156I The registration server was missing

Explanation: No additional information is available for this message.

CTGEM0157I Registration server trust failure

Explanation: No additional information is available for this message.

CTGEM0158I The registration was rejected

Explanation: No additional information is available for this message.

CTGEM0159I The status server was missing

Explanation: No additional information is available for this message.

CTGEM0160I Status server trust failure

Explanation: No additional information is available for this message.

CTGEM0161I Unknown reason

Explanation: No additional information is available for this message.

CTGEM0162I The recovery service received a recovery request.

Reason: reasons_for_recovery_request

Operating system GUID of the common agent: GUID

Reported host name: host_name

Observed host name: host_name

Reported IP address: IP_address

Observed IP address: IP_address

Explanation: This message records that a common agent submitted a recovery request. The message contains information about the agent that submitted the recovery request and the reasons that it submitted a recovery request.

Potential reasons for submitting a recovery request are listed in messages CTGEM0155I through CTGEM0161I.

CTGEM2000E The agent manager cannot find the requested message.

The message key is message_key.

The message bundle is message_bundle.

Explanation: The agent manager attempted to log the message identified by message key message_key, but the message is not in the message bundle. Probable causes for this problem are:

vThe message bundle file, message_bundle, does not exist

vThe message bundle was found but does not contain the specified message key

vThe message bundle is in the wrong directory

Administrator Response: Collect the message and trace files and contact IBM Customer Support.

CTGEM2100I The WebSphere configuration script script_name started. The action taken is action_code.

Explanation: No additional information is available for this message.

CTGEM2101I The WebSphere configuration script script_name completed successfully.

Explanation: No additional information is available for this message.

CTGEM2102E The WebSphere configuration script script_name completed with the following error: error

Explanation: The WebSphere configuration script script_name completed but returned the error identified by error. This can indicate a programming error.

Administrator Response: Save the message and trace files (msg_EPM_Install.log and trace_EPM_Install.log), and then contact IBM Customer Support.

CTGEM2103E The required property property is missing.

Explanation: The property property is required but was not supplied. To find out which script failed, read the text of message CTGEM2100I, which occurs earlier in this message file (msg_EPM_Install.log).

Administrator Response: Save the message and trace files (msg_EPM_Install.log and trace_EPM_Install.log), and then contact IBM Customer Support.

CTGEM2104E The action specified by the action argument is not accepted by this script. The action must be either action_1 or action_2.

Explanation: The command-line argument action is not

216Tivoli Intelligent Orchestrator Problem Determination and Troubleshooting Guide