IBM 51 manual COPDEX001E The system cannot get a Jndi context

COPDEX001E The system cannot get a JNDI context.

Explanation: No additional information is available for this message.

COPDEX002E The system cannot use the "VALUE_0"

JMS destination.

Explanation: No additional information is available for this message.

COPDEX003E The system cannot perform the type conversion for VALUE_0 because the type information that was set has an incorrect value. (Field argument type is VALUE_1.)

Explanation: No additional information is available for this message.

COPDEX004E The system cannot perform the type conversion for VALUE_0 because the type information was not set. (Field argument type is null.)

Explanation: No additional information is available for this message.

COPDEX005E The "VALUE_0" logical operation does not exist.

Explanation: No additional information is available for this message.

COPDEX006E "break" cannot be used outside of a "while" or "foreach" loop.

Explanation: No additional information is available for this message.

COPDEX007E "break" cannot be used outside of a "while" or "foreach" loop.

Explanation: No additional information is available for this message.

COPDEX008E "break" cannot be used inside of a "finally" block.

Explanation: No additional information is available for this message.

COPDEX009E The VALUE_0 condition is missing an equal ( = ) sign.

Explanation: No additional information is available for this message.

COPDEX010E The system cannot add the VALUE_0 condition to the VALUE_1 table.

Explanation: No additional information is available for this message.

COPDEX011E The system cannot find the DCM object VALUE_0.

Explanation: No additional information is available for this message.

COPDEX012E The system cannot find the field for the attribute VALUE_0.

Explanation: No additional information is available for this message.

COPDEX013E "break" cannot be used inside a "finally" block.

Explanation: No additional information is available for this message.

COPDEX014E The system cannot resolve the variable VALUE_0.

Explanation: No additional information is available for this message.

COPDEX015E The system cannot save the "VALUE_0" variable. The variable value is probably longer than 4000 bytes.

Explanation: No additional information is available for this message.

COPDEX016E There is no default service access point for the execute command that is associated with the device ID:VALUE_0.

Explanation: No additional information is available for this message.

COPDEX017E The system requires the token VALUE_0 to be here VALUE_1.

Explanation: No additional information is available for this message.

COPDEX018E The system requires a VALUE_0 at the beginning of the query.

Explanation: No additional information is available for this message.

Chapter 10. Tivoli Intelligent Orchestrator messages 125