3Com 900-0368-01 manual Single Server Initial Installation

Single Server Initial Installation 33

You may start, stop and monitor the 3Com IP Conferencing Module applications using the following command(s):

>service <application> startstopstatusrestart Else, you may do so using the web interface.

Your installation is complete.

To add new user or to change your profile visit appropriate

URL corresponding to /opt/3com/components/presconf.2.5.3/gui.

Once again, Please report any installation problem to "3Com Support" <support@3com.com>

****************************************************

*Output, from this install session, was saved to:

*/opt/3com/components/presconf.2.5.3/install_log.Dec_07_2005

****************************************************

Would you like to start the 3Com IP Conferencing Module services now? (N/Y) [N]: y

Select “Y” to complete the installation and start the 3Com IP Conferencing Module services. Select “N” (the default) to complete the installation but not start the services.

Validating configuration file

Configuration file is valid for this release.

Applying configuration to all unconfigured components

Configuring VCX components:

Configuring vcx-firewall-firstboot: [ OK ]

Configured VCX components: 1 configured.

Component configuration succeeded.

Stopping VCX-Firewall: [ OK ]

Starting VCX-Firewall: [ OK ]

Starting VCX Services:

Starting vcx/mysql: [ OK ]

Starting vcx/confbridge: [ OK ]

Starting vcx/sipconf: [ OK ]