3Com 900-0368-01 manual Dial Plan and 3Com IP Conferencing Module Configuration

38CHAPTER 2: INSTALLATION SCRIPTS

8Type the maximum number of simultaneous sessions. Each session requires one system device license.

9Click OK or Apply to save your changes.

When you click Apply, the system adds a trusted endpoint. Click SIP Applications > Trusted SIP Interfaces to verify.

10Configure the dial plan. You must add an extension list to the dial plan to support routing of extensions to the conference server or edit the extension list if one has already been created.

Dial Plan and 3Com IP Conferencing Module Configuration

You must configure the dial plan to complete the 3Com IP Conferencing Module configuration. The following procedure describes the process.

1See the NBX Administrator’s Guide for more information about the details in these steps.

2Add an extension list to the dial plan to support routing of extensions to the 3Com IP Conferencing Module.

For example, you can define the 3Com IP Conferencing Module extension list as follows:

/	Route	Description
/	-----	-----------
DestinationRoute Create	900	Conference
/	Route	Entry	DestinationExtension
/	-----	-----	--------------------
DestinationRouteEntry Create	9	1	*0900

/ Extension List *0900 holds the internal extension of 3Com IP Conferencing Module

3Create a route entry in the dial plan for the dialed-in digits the telephone user of the 3Com IP Conferencing Module enters.

For example, using the extension list created in Step 1, the entry below shows a dial-in that begins with 900.

/	ID	Entry	Digits	Min	Max	Class PrioRoute
/	---	-----	------	---	---	----- ---------
Table Entry Create	1	6	900	3	3	internal0900