Upgrade, Start of install-upgrade Script

	Be aware that most Mail Transfer Agents (MTAs) require valid To: and
	From: addresses.
	If the user fails to receive the e-mail message, check for errors in
	/opt/logs/vcx-linux/maillog. After resolving the problem, run
	the E-Mail setup again.

Upgrade	Software upgrades are completed by running two scripts: install-upgrade
Installation	and vcx-switchversion. The install-upgrade script upgrades the VCX Linux
	operating system to the latest version (if necessary) and installs the
	software packages. The vcx-switchversion script provisions the system
	with the software packages.
	It is possible to upgrade from Apps 2.0 to Apps 3.0 provided that the
	server is designated as either an all-in-one or primary server.

Sample To run the install-upgrade script: install-upgrade Script

1Untar the software files and add them to a directory on the server.

2Log in to the server as root.

3Enter a password (default is pvadmin).

4Go to the directory where the software files are located.

5Press Enter (or Return).

-bash-2.05b# ./install-upgrade

Enter ./install-upgradeat the command prompt.

---------------------------------------------------------------------------

-------------------------- VCX Upgrade Installer --------------------------

---------------------------------------------------------------------------

------------------------- Pre-Installation Checks -------------------------

Checking that required files are present...

Checking which packages are needed...
3ComInstall-1.1-1.noarch.rpm	: already present
vcx-firewall-1.5.5-1.noarch.rpm	: needed
mysql-3.23.58-1.i386.rpm	: already present