34CHAPTER 2: INSTALLATION SCRIPTS

Starting vcx/sippeng: [ OK ]

Starting vcx/vcxdb: [ OK ]

Started VCX Services: 5 started. -bash-2.05b#

End of IP Conferencing Module Configuration

Following successful completion of the script, the 3Com IP Conferencing Module services will be installed. Start the services using a script command, shell command, or web interface selection (as noted above).

Post Installation

Before the 3Com IP Conferencing Module can be used, the system must

Configuration

be configured to work with it. The following items must be set up:

 

Create Routes to the:

 

Conference Server

 

Conference Attendant

 

Add Trusted SIP Interfaces

 

Configure the IP Conferencing Module

 

Test the E-mail Notification Setup.

Set up Routes

You must program the NBX dial plan with routes to the conference server

 

and the conference attendant server.

For information on how to program the NBX dial plan, see the 3Com NBX

Administrator’s Guide.

To create routes to the conference server/conference attendant server:

1Using a browser, log in to the NBX system as admin (default password is besgroup).

2Program the digit sequence for conferences. For example, to program the range 8000 to 8999, enter:

Command

ID

Entry

Digit

Min

Max

Class

Priority

Route

TableEntry Create

1

32

8

4

4

Internal

0

8

Page 34
Image 34
3Com 900-0368-01 Post Installation, End of IP Conferencing Module Configuration, Set up Routes, Administrator’s Guide