3
Description of the machine
•On receiving the machine check its condition.
•Always keep it perfectly clean
•Check regularly that the engine is serviced (petrol engine), the state of the supply cable and extension cable (for electric motor).
•Always keep alert when working
•Check that the parts are properly fixed (no abnormal vibration) and that it is correctly assembled.
SEE FIG. 1
1- Safety lever (dead man’s handle)
2 - Steering shaft
3 - Depth adjustment knob (mm)
4- Spanner
5 - Shaft adjustment knob
6 - Quick raise/lower lever
7 - Sling loop
8 - Engine / Motor
9 - On / off switch
10 - Belt guard
11 - Chassis
12 - Belt tensioner
13 - Drain extension
14 - Quick release guard
15 - Centring dome nuts
16 - Dust extractor hose
17- Transmission
18- 200 mm wide drum
19- Floor edge drum (optional)
20- Supply cable
4
Handling - Transport
•The height of the steering shaft can be adjusted by slackening the knob (H) [SEE FIG. 2].
•Upon installation at the work site, the machine can be moved without running the engine simply by pushing it along on its three wheels.
•A slinging ring (A) enables the lifting ot the machine.
5 
Interchange of drums
Motor off.
Take care to avoid accidental damage.
Disconnect the machine.
•Unscrew the three drum centring dome nuts (F)
[SEE FIG. 3].
•Remove the right shield (G).
•Fit the drum (H) and slid it on its shaft (J).
•Refit the shield.
•Tighten the capnuts.
•To mill up to a wall, fit the side drum (K), housing
(L), plate (M) and bearing (N) in the place of the original drum and plate [SEE FIG. 4].
English
6 
Check before starting
Please read the instructions for use prior to operating the machine for the first time.
The use of ear protection is mandatory.
The working area must be completely cleared, well lit and all safety hazards removed (no water or dangerous objects in the vicinity)
The operator must wear protective clothing appropriate to the work he is doing. We recommend that this includes both eye and ear protection
Any persons not involved in the work should leave the working area
21
