Husqvarna SMC 50 E Motors, Chain saw engine FIG, Electric Motor FIG, Electric motor feed unit FIG

DESCRIPTION

Motors

Chain saw engine (FIG. 9)

The one-man sawmill is powered by a standard chain saw ranging from 65 cm3 up to 95 cm3. The chain saw is mounted on a vibration-free plate (9), where it is screwed into the bar mounting with two spacers and screws (15). The saw’s speed is controlled from the throttle (17) on the handlebar (18), which is connected by a cable to the chain saw. The cable is secured in a special mounting that is screwed onto the saw. For a further description of the chain saw, see the enclosed operator’s manual for the chain saw.

Electric Motor (FIG. 10)

The one-man saw is powered by a 3-phase motor (21). The motor is started and stopped with the start and safety switches on the distribution box, which has built- in motor protection. There is also a connection for an electric cable with single phase inversion.

Electric motor feed unit (FIG. 11)

The feed unit is powered by a 42 volt DC motor (35). The speed of the motor is controlled variably from the control box.

FIG. 9

17

18

9

FIG. 10

24

FIG. 11

35

12 – English