USE
Securing the Log
!WARNING!
Exercise care during all log hand- ling. Heavy lift! Wear boots or shoes fitted with steel toecaps.
1.Fold up the stops (C) on the left-hand side of the rails.
2.Roll the log up against either the long or the short log support, depending on the timber dimensions.
• than 300 mm to the end of the rails
• than 500 mm to the start of the rails
This means that when using two rail sections, the maximum log length is 5200 mm.
3.Raise the log using the log lifter (B) so that the log’s core is horizontal.
4.Lock the log in position with the log lock (D).
FIG. 43 |
FIG. 44 |
English – 25 |
