STARTING AND STOPPING
Starting the electric sawmill (FIG. 41)
!WARNING
The sawmill must not be started until the appropriate current and voltage have been connected. Use suitable personnel trained in the country in question.
NOTE! The first time the sawmill is started or when it has been moved to another power outlet:
•Test start the sawmill in accordance with the starting instructions.
•Check the chain direction. If the chain runs in the wrong direction, there is a phase inverter on the power connector (FIG. 40). The phase is inverted with the aid of a screwdriver, as illustrated in FIG. 40.
1.Check that the power cable is connected correctly.
2.Keep the green start button (29) pressed in using your left hand. Now press in the start/stop handle
(B) with your right hand and the sawmill will start. The sawmill stops as soon as the handle is not activated. The sawmill can also be stopped using the red stop button (32).
3.Check the chain direction, see FIG. 29.
Starting the electric sawmill with feed (FIG. 42)
1.Check that the power cable is connected correctly.
2.Keep the green start button (29) pressed in using your right hand. Then press the black safety switch (37) using your left hand. When the sawmill has started, the safety switch must be held in during sawing.
3.Start feeding with the white start button (30) using your right hand. Ensure that the control (31) is in position ”0”.
4.Then increase the speed with the variable control so that the saw carriage starts moving. Then adjust to the desired feed speed. CAUTION! There is variable adjustment for feeding, so overloading is possible depending on the width of the saw cut. In the event of overloading, the current to the saw motor is broken.
5.The sawmill stops as soon as the safety switch is not activated.
6.Return feeding is started with the white start button (30) and the speed is controlled with the variable control. Return feeding only starts when the saw motor is switched off.
FIG. 40
FIG. 41 | B |
| |
32 | 29 37 |
A |
|
27 |
|
16 |
|
FIG. 42
30
29
31
37
27
24 – English
