Rev. 0010

PISTON REPLACEMENT

1.OPEN GLASS. Glass must remain open throughout procedure.

2.Loosen Allen set Screw (1).

3.While holding onto piston, remove and save pin (2).

4.Slide piston out.

5.Slide new piston in making sure the U-shaped end fits around pin at bottom of arm (3).

6.Line up upper pin with arm, arm with strut, and replace pin.

7.Replace Allen set screw.*

2

 

T

O

N

1

IS

 

 

 

 

 

 

 

 

 

P

 

 

 

 

REAR OF CASE

A

R

M

3

 

 

 

*After installing either piston, prime them as outlined in the "Read

Before Raising Glass" warning found in the "Installation Instructions" section of this booklet.

FOR PROMPT SERVICE

When Contacting the Factory regarding problems, Be sure to have the Case MODEL and SERIAL NUMBER Handy.

This Information is on a plate located on the case itself.

ESHS Straight Glass

IF GLASS DOES NOT CLOSE/STAY OPEN PROPERLY- LEVEL MINI TOP HARDWARE

During shipping, it is possible that the mini top hardware housing the pistons and armature has been jostled out of position. This affects the opening angle of the glass.

1.Be sure mini top hardware is level front to back by placing a level along the top of the mini top housing at each hinge location. If it is not, you will need a shim kit before you can correct.Order from Hussmann Chino.

2.Remove top glass and panel at top of hardware housing.

3.Mark position of hardware (glass) in relation to case before loosening hex screw using masking tape applied on mini top hardware and case,and pen. Hex

screw allows realignment of glass angle and position front to back.

4.Raise glass and loosen hex screw. (See item/diagram #6 on page 13.)

5.Shim to adjust until level using shims available from Hussmann Chino (16 or 20 gauge stainless steel).

6.Check angle by using level placed on top of mini top hardware. Note: a 6" level will fit perfectly within access area.

7.Remove 11/4" chrome cap at front of case arm support. The removal of this cap allows finger access

to hold nut plate while tightening hex screw.

8.Hold nut plate and tighten hex screw.

9.If there is still a problem with glass staying open over- level by adding an addition shim under front of case.

NOTE: BEFORE MAKING ANY OF THE

11

Page 10 Page 12
Page 11
Image 11
hussman IGHT-ESH/ESHS-0010 manual For Prompt Service, Piston Replacement
Page 10 Page 12

IGHT-ESH/ESHS-0010 specifications

The Hussman IGHT-ESH/ESHS-0010 is a state-of-the-art refrigeration unit designed specifically for commercial applications. Renowned for its durability and efficiency, this unit stands out in the competitive landscape of commercial refrigeration. With a focus on energy conservation and environmental responsibility, the IGHT-ESH/ESHS-0010 incorporates advanced technologies that enhance its performance while reducing operational costs.

One of the standout features of the Hussman IGHT-ESH/ESHS-0010 is its innovative refrigeration system. Utilizing a highly efficient compressor, the unit ensures optimal cooling performance while minimizing energy consumption. This efficiency is further enhanced by the incorporation of variable speed fans, which automatically adjust their speed based on the cooling demand. This feature not only improves energy efficiency but also reduces noise levels, making it suitable for a variety of commercial environments.

The design of the IGHT-ESH/ESHS-0010 emphasizes versatility and adaptability. It is equipped with adjustable shelving and modular components, allowing users to customize the interior layout according to their specific needs. This flexibility makes it an excellent choice for retailers, foodservice establishments, and convenience stores that require dynamic display and storage solutions.

Temperature control is crucial in refrigeration, and the Hussman IGHT-ESH/ESHS-0010 excels in this area. Featuring advanced digital controls and monitoring systems, users can easily set and adjust temperatures to meet their requirements. The unit provides consistent temperature management, which is essential for preserving the quality and safety of perishable products.

Another remarkable aspect of the IGHT-ESH/ESHS-0010 is its focus on sustainability. The unit is designed with environmentally friendly refrigerants that comply with today’s stringent regulations, contributing to reduced greenhouse gas emissions. Additionally, the Hussman brand is committed to energy-efficient solutions that not only benefit the environment but also help businesses save on energy costs.

Finally, the construction of the Hussman IGHT-ESH/ESHS-0010 is robust, featuring high-quality materials that ensure longevity and resilience in a busy commercial setting. Its attractive exterior design ensures that it seamlessly fits into any retail or foodservice environment while providing exceptional cooling performance.

In summary, the Hussman IGHT-ESH/ESHS-0010 is a centerpiece in modern commercial refrigeration. With its combination of energy efficiency, user-friendly features, and sustainable design, it represents a smart investment for businesses aiming to enhance their operational efficiency and environmental stewardship.
Top Page Image Contents