Secondary Installation
1.Carefully remove logs from box. Check to ensure there is no damage. It is very important to install all logs in their proper position to insure safe, optimum operating conditions.
2.Place the log set into the firebox. Locate each log by seating it down onto the burner tray support pins. Follow Figures
48to 54 proper log placement.
3.A bag of ceramic fiber embers and rock wool embers is provided gently remove the ember material from the plastic bag. Spread a layer loosely in a random manner across the burner tray. Do not allow any embers to rest against pilot assembly. (See diagram provided for proper ember placement.)
DO NOT pack this ember material as this could create an unsafe condition, leave embers loose.
4.Upon the first light up, watch for ignition to ALL burner ports. If a long delay is noted: First, wait for the appliance to cool down.
•Open the front door of the appliance.
•Check to carefully reposition the embers making sure that burner ports are not plugged solid or blocked.
Figure 50: Step 3 of Log Placement.
Figure 51: Step 4 of Log Placement.
Figure 52: Complete Log Placement.
34
