Belt Replacement, PUMP-DRIVE Belt | Woods Equipment MZ2252K guide

WOODS

BELT REPLACEMENT

PUMP-DRIVE BELT

1.Remove engine-cutterdeck belt (see engine-cutterdeck belt replacement).

2.Attach an extension to a 3/8" drive ratchet. Insert the ratchet extension in the square hole of the pump drive idler arm. Use the ratchet handle to rotate it enough to remove the pump drive belt.

3.Install a new pump drive belt in the same manner as it was removed.

4.Re-install engine-cutterdeck belt (see engine-cutterdeck belt replacement).

39

Image 39

Woods Equipment MZ2252K manual Belt Replacement, PUMP-DRIVE Belt

Contents

OPERATOR’S Manual Wash Hands After Handling California Alitec BMP Central Fabricators Gannon Gill WAIN-ROY Woods Important MessageTo the Dealer To the Owner Table of Contents Become Alert Safety Preparing for Safe Operation Machine Operation Operating Safely GeneralStarting Maneuvering Safely Interrupting operation Seat Belt Useage Mowing Slopes Hydraulic System Maintenance Safety GeneralBlades Fuel Battery Storage SafetyJump Starting Labels OFF LH Tank RH Tank Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 NN N At operators right side Controls Lift and traction levers operators right side Turns during forward movementTurns during reverse movement Foot Lift Pedal Pushing the Machine Parking brake in on position Operators left sideCompartment beneath the seat Viewed from above PRE-OPERATION Check List OWNER’S Responsibility PRE-OPERATION Check List Operator Presence Interlock System OperationFueling Before Starting the Engine Driving Operating Notes Cutting Tips Cutting Machine Maintenance ChartEngine Hydraulics General Maintenance Record Maintenance BatteryCheck Daily Lubrication Hydraulic System After First Five 5 HoursPeriodic OIL Changes Engine OIL Spark PlugsFuel Filter Heavy Duty Cyclonic AIR Cleaner To replace air cleaner elementsEngine Cooling Washing Machine Cleaning Machine Blade Balance Blade InstallationBlade Removal Sharpening Adjustments Deck LevelingCounterbalance Springs Front Deck LIP Height of cut ranges for roller adjustmentHeight of CUT Rear Deck Rollers For clarity brake in on position Parking brake assembly tire and deck not shownControl Levers Parking Brake Reverse Return Hydrostat AdjustmentsRight side adjustments Neutral Cutterdeck Belt Tracking HandlesDampers PUMP-DRIVE Belt Belt Replacement Limited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company