MAINTENANCE
WOODS
6 | 1 |
2 2
2 |
| 4 |
|
| |
|
| 5 |
| 3 | 4 |
|
|
2 2
6
LUBRICATION
Every 50 hours of operation, lubricate the following points
1.Deck lift rockshaft (1 point)
2.Deck lift pivots (6 points)
3.Brake lever pivot (1 point)
4.Push arms (2 points located at rear of cutterdeck under each fuel tank)
5.Isolation mounts (4 points located under seatt at front of machine)
6.Caster wheel pivots (2 points)
(Lubricate every 500 hours or once a year)
NOTE ON BLADE SPINDLES - The blade spindles on these machines use a superior sealed bearing that does not require relubrication.
28
