WOODS
CONTROLS
FUEL VALVES (U) - A fuel tank selector valve is |
|
provided on oil cooler mounting bracket.The fuel tank |
|
selector valve has three positions: |
|
Off: The tank selector is off when the lever points to- |
|
ward the machine. The selector should be off when- |
|
ever the machine is transported or stands unused for |
|
any length of time. Shutting off the fuel supply avoids |
|
the possibility of flooding should any dirt get under |
|
the carburetor float needle. Leaving the tank selec- |
|
tor in either tank position can allow severe flooding, |
|
which may ruin the engine by diluting the oil. |
|
Right Tank: Fuel flows from the right tank when the |
|
selector is turned 1/4 turn toward the left, when fac- |
|
ing the valve. |
|
Left Tank: Fuel flows from the left tank when the |
|
selector is turned 1/4 turn toward the right, when fac- |
|
ing the vlave. | Located on oil cooler behind seat. |
FOOT LIFT PEDAL
The foot lift pedal A, allows the operator to raise the mower deck to the highest position without removing his/her hands from the traction controls.
To use the foot lift pedal A, press on it to raise the deck. The picture shows the foot lift pedal mounted on the RH side of the machine. If you prefer to have the foot mounted lift pedal on the left hand side, simply loosen the existing hardware and mount the foot lift pedal in a similar manner to the left hand side. Tighten the hardware to secure the foot lift pedal.
19
