Digital Signage, Title and function of each part | Hyundai P224WK

Title and function of each part

DIGITAL SIGNAGE

Title and function of each part

Control Panel

1Remote control receiving sensor.

2Power display LED red-stand by/ Green-working.

3~ 0 OSD button.

3Power button ; to turn the power on or off.

4Input selection button : to select other connected device.

5Menu button : to display menu or exit from the menu.

6select button.

7To move down in OSD menu.

8To move up in OSD menu.

9To move left and control the volume down in OSD menu.

0To move right and control the volume up OSD menu.

3 4 5 6 7 8 9 0

POWER SOURCE MENU SELECT

VOL

1 2

/36

Base Frame Type (Front)

Kiosk Type (Rear)

** The locations of OSD board and remote control receiving sensor may vary depending on models.

Image 11

Hyundai P224WK manual Digital Signage, Title and function of each part, Control Panel

Contents

Page U.S.A EN55024 1998+A1 2001 +A2 EN 61000-3-2 2000 +A2 DECLARATION OF CONFORMITYAll of Digital sigange HYUNDAI IT provides EN60065 EN55022 1998+A1 2000 +A2 2003 CLASS A Contents DIGITAL SIGNAGE Major features Safety Information The main plug of the power supply cord shall remain readily operable Do not hang on or jump to the product or mounting rack Image quality of the product Be sure to understand Users manual Remote control & batteriesCheck the product list Base Frame Type Proper location for product installation Control Panel Title and function of each part 3 4 6 7 9 ! # % Terminal panel5 8 0 @ $ 10/36 Remote controlHow to insert batteries Satellite receiver How to Connecting Kiosk11/36 How to Connecting Digital RGBHDMI Vertical frequency ResolutionSupport timing for HDMI Horizontal frequency 14/36 How to Connecting analog RGB PC D-SUB Support timing for PC 16/36 How to Connecting the component Option Support timing for component & AV Resolution 18/36 How to Connecting the the video Option How to Select the Picture Mode Adjusting OSD and explanation of its function 20/36 How to Set the Desired Picture 21/36 How to Select a Colour Tone 22/36 How to Set the Display Size 23/36 How to set image adjustment in PC mode Supported only in PC mode Mode How to Set NoiseHow to Select the Audio ReductionNR How to Adjust the Desired Audio Mode 26/36 How to Select Auto VolumeHow to Select Sound Mode 27/36 How to ResetHow to Set Clock,Sleep Time, ON/OFF Time 28/36 Choosing the Your Languages 29/36 How to set OSD toneHow to Set Key-Lock Example of installation install 3x2 with 6 units How to Set the Multi Function Set up Value 32/36 How to Set the Heat Control Diagnosis the system as it supports Plug and Play 34/36of speaker cable If the batteries are drained, replace them with new batteries D320MLI/G/D400ML D420MLI/G/P/T D460MLI/G/P/T/H SpecificationsRecommended resolution Power D405MLI/G/D407MLI/G/P/T 1. SPEED 9600 Baud/s, 8 bit, No parity, 1 Stop bit REMOTE CONTROL / RS232C COMMAND SPEC2. REMOTE CONTROL WAVE FORM To factory reset all set COMMAND TYPECommand example To power off set that is SET ID Description 5. COMMAND TYPECommand Key value 7. REMOTE CONTROL KEY CODE TABLE HYUNDAI IT Service Center