Hyundai P224WK manual Digital Signage, Set up Value

DIGITAL SIGNAGE

Set up Value

installation item	Product 1	Product 2	Product 3	Product 4	Product 5	Product 6
H Set Count	3	3	3	3	3	3
V Set Count	2	2	2	2	2	2
Display Sequence	1	2	3	4	5	6
H Edge ADJ /	These are the set up value to make up the un-displayed area of Bezel Part.
V Edge ADJ	It can be adjustable according to the contents
SET ID	It is necessary to control via RS232 communication port on PC. But do not
	need to set up or change when they are not controlled by PC
Master	You are recommended to use the Master on state only one of products that
	you are using

[Cautions]

-In case of connecting the products in series from the input device (HDMI, analog RGB, component, video etc.), up to about 25 units are possible. But, the number of connecting devices can be different from the input signal level of each device and thereby amplified distributor can be needed for this product.

(when over 25 units are connected, the screen may not be displayed properly)

-You are recommended to use the component and progressive frequency of digital RGB in case of using multi-vision function.

(It may not be displayed properly when using Video input and interlace frequency)

English

31/36