DIGITAL SIGNAGE
-The main plug of the power supply cord shall remain readily operable.
-An apparatus with CLASS I construction shall be connected to a Mains socket outlet with a protective earthing connection.
-Make sure that the power cord and other cables are correctly plugged in.
-Plug the power cord correctly into the end, do not wobble/jiggle, it may cause electric shock fire.
-Do not touch the power cord with wet hands, it may cause electric shock.
-Overloaded AC outlets and extension cables are as dangerous as the power cord being damaged, call service engineer for replacement as it may cause electric shock or fire.
-Do not use multiple devices in a single power outlet, it may cause overheating or fire.
-Do not use or place sharp objects near the LCD surface, as this can cause damage to the screen itself.
-When cleaning the LCD screen / Surface, do not use chemical cleaning products as this can seriously damage the special coatings on the screen. Only use water to dampen a soft cloth and lightly clear the screen.
-Over time dust deposits can build up inside the product, this can cause the product to overheat thus causing premature malfunction or fire. Please do not attempt to clean the inside of the product yourself, please contact the local service agent.
-Do not use alcohol or strong chemical solvent such as methyl, ethyl or a Isopropyl.
-In the case of cleaning, be sure to remove the power cord and wipe with a soft dry fabric.
-Keep batteries for the remote control out of children's sight.
-Batteries should be inserted using the correct polarity
-Use only new batteries, do not mix old & new.
-Place unit on a stable bracket or surface.
-More than 2 people should work together when moving or installing.
English
/36
