Installing Your JAM STATION (Multimedia Memory Card
Reader):
(Desktop):
1.Shut down your computer and turn it’s power off.
2.Locate the FEMALE parallel / printer port in the back of the computer.
3.Plug the MALE
4.If an existing MALE printer lead is plugged into the FEMALE parallel / printer port, unplug it.
5.Plug that existing MALE printer lead into the FEMALE parallel port / printer port attached to the cable for the
JAM STATION.
6.Locate the FEMALE PS/2 (keyboard or mouse) port in the back of the computer.
7.Unplug the MALE PS/2 (keyboard or mouse) lead from the computer.
8.Plug the MALE PS/2 (keyboard or mouse) lead from the JAM STATION into the FEMALE PS/2 (keyboard or mouse) port in the back of the computer.
9.Locate the last FEMALE PS/2 (keyboard or mouse) port attached to the JAM STATION. Plug the MALE PS/2 (keyboard or mouse) lead into the FEMALE PS/2 (keyboard or mouse) port for the JAM STATION.
10.You are now ready to JAM!
(Laptop):
1.Shut down your computer and turn it’s power off.
2.Locate the FEMALE parallel / printer port in the back of the computer.
3.Plug the MALE
4.If an existing MALE printer lead is plugged into the FEMALE parallel / printer port, unplug it.
5.Plug that existing MALE printer lead into the FEMALE parallel port / printer port attached to the cable for the
JAM STATION.
6.Locate the FEMALE PS/2 (keyboard or mouse) port in the back of the computer.
7.Plug the MALE PS/2 (keyboard or mouse) lead from the JAM STATION into the FEMALE PS/2 (keyboard or mouse) port in the back of the computer.
8.You are now ready to JAM!
8
