Loading a DVD or CD

1.Press the Eject button. The tray slides out of the drive.

2.Place the disc in the tray with the label facing up.

3.Close the tray by gently pushing the tray in until it latches.

Attention: Do not use force or insert foreign objects to open the tray. If your tray does not open when you press the Eject button, see “Manually ejecting a DVD or CD” for more information.

Manually ejecting a DVD or CD

If you press the Eject button and the tray does not slide out, turn off the computer and straighten a large paper clip to form a tool, as shown in the illustration. The straightened end must extend at least 45 mm (1.8 in.). Insert the extended end into the manual-eject hole on the front of the drive. Push the paper clip until the tray opens. Gently pull out the tray until you can remove the disc.

45mm

1.8in

Using DVD

To use DVD, you need to set up your computer as follows after installing the CD-RW/DVD drive into the Ultrabay 2000 drive bay:

1.Enable the DMA setting (Windows 98, Windows 95, and Windows 2000 users only).

2.Install DVDExpress(the DVD movie player program).

Part 1. About the CD-RW/DVD Combination Ultrabay 2000 Drive 1-5

Page 11
Image 11
IBM 2000 manual Loading a DVD or CD, Manually ejecting a DVD or CD, Using DVD