IBM 2000 manual You cannot read from the CD after successfully writing to it

1.Eject the CD through software.

2.Use the Eject button.

3.Turn off the computer. Wait 45 seconds; then turn on the computer and try using the Eject button again.

4.If other methods do not work, use the manual-eject hole, using instructions given in “Manually ejecting a DVD or CD” on page 1-5.

You cannot read from the CD after successfully writing to it.

Take the following actions:

1.If you can read the CD in another CD player or you can see previous sessions, the directory information might be damaged on the volume, making it unreadable. To get ideas for troubleshooting, check the documentation that comes with the software.

2.You might have a damaged CD-R or CD-RW disc. Try a new CD-R disc or CD-RW disc, or another brand of CD.

3.If you can read from a CD-RW disc in the writing drive, but not in another MR drive, be sure that a UDF Reader program is installed in the computer.

4.Avoid writing at the slower 1X speed unless required by your computer.

About the CD-RW/DVD Combination Ultrabay 2000 Drive (Translate) 2-11