IBM AS/400 manual v IBM 5494 Remote Control Unit User’s Guide, GA27-3852, Prompt, Parameter, Field

vIBM 5494 Remote Control Unit User’s Guide, GA27-3852

AS/400	AS/400		5494		AS/400
Prompt	Parameter	Field		Subfield	Value	5494 Value	Notes
Default	DFTPKTSIZE	5		1	64	0
packet size
					128	1
					256	2
					512	3
Local	LCLLOCNAME	H1		1	-	-	Values specified for the AS/400
location							CRTCTLRWS command and for the
name							5494 Remote Control Unit must
							match. This will probably match
							LCLLOCNAME in the network
							attributes. This value will probably
							match the LCLLOCNAME in the
							network attributes.
X.25 link	LINKPCL	6		2	*QLLC	01
protocol
					*ELLC	10
Link type	LINKTYPE	AA		-	*X25	1	5494 configuration values must
							match the values specified for the
							LINKTYPE parameter on the
							CRTCTLAPPC command. For
							APPC controllers that specify
							LINKTYPE(*SDLC), the value
							specified in the 5494 configuration
							must be compatible with the
							physical interface (INTERFACE
							parameter) specified on the
							CRTLINSDLC command.
							Select 1 for communications using
							X.25 lines.
X.25	NETLVL	6		5	1988	0	Used for X.25 communications only.
network
					1984	1
level
					1980	2
Remote	RMTCPNAME	13		-	-	-	Values specified for the AS/400
control							CRTCTLAPPC command and for
point name							the 5494 Remote Control Unit must
							match.
Remote	RMTNETID	11		3	-	-	Values specified for the AS/400
network							CRTCTLAPPC and CRTCTLRWS
identifier							commands and for the 5494
							Remote Control Unit must match.
							This will probably match LCLNETID
							in the network attributes and H1:2.
Remote	RMTLOCNAME	12		-	-	-	Values specified for the AS/400
location							CRTCTLRWS command and for the
name							5494 Remote Control Unit must
							match.

Chapter 7. Communicating with remote workstation controllers 55