IBM AS/400 v IBM 5494 Remote Control Unit Planning Guide, GA27-3936, Prompt, Parameter, Field

For more information about configuring the 5494, see these books:

vIBM 5494 Remote Control Unit Planning Guide, GA27-3936

vIBM 5494 Remote Control Unit User’s Guide, GA27-3852

AS/400	AS/400		5494
Prompt	Parameter	Field	Subfield	AS/400 Value	5494 Value	Notes
Connection	CNN	3	1	*NONSWTPP	0
type				*MP
				*SWTPP	1
			3	*MP	0
				*NONSWTPP	1
				*SWTPP
Duplex	Duplex	3	2	*HALF	0
				*FULL	1
NRZI data	NRZI	3	4	*YES	0
encoding
				*NO	1
Local	LCLLOCNAME	H1	1	-	-	Values specified for the AS/400
location						CRTCTLRWS command and
name						for the 5494 Remote Control
						Unit must match. This will
						probably match LCLLOCNAME
						in the network attributes. This
						value will probably match the
						LCLLOCNAME in the network
						attributes.
Link type	LINKTYPE	AA	-	*SDLC	0,2,3	5494 configuration values must
						match the values specified for
						the LINKTYPE parameter on
						the CRTCTLAPPC command.
						For APPC controllers that
						specify LINKTYPE(*SDLC), the
						value specified in the 5494
						configuration must be
						compatible with the physical
						interface (INTERFACE
						parameter) specified on the
						CRTLINSDLC command.
						Select 0 for communications
						using SDLC lines other than
						X.21 connections.
Remote	RMTCPNAME	13	-	-	-	Values specified for the AS/400
control						CRTCTLAPPC command and
point name						for the 5494 Remote Control
						Unit must match.
Remote	RMTNETID	11	3	-	-	Values specified for the AS/400
network						CRTCTLAPPC and
identifier						CRTCTLRWS commands and
						for the 5494 Remote Control
						Unit must match. This will
						probably match LCLNETID in
						the network attributes and H1:2.

Chapter 7. Communicating with remote workstation controllers 49