IBM v IBM 5494 Remote Control Unit Planning Guide, GA27-3936, Prompt, AS/400 Parameter, Field

vIBM 5494 Remote Control Unit Planning Guide, GA27-3936

vIBM 5494 Remote Control Unit User’s Guide, GA27-3852

AS/400			5494	AS/400
Prompt	AS/400 Parameter	Field	Subfield	Value	5494 Value	Notes
Local	ADPTADR	H1	5	-	-	Values specified in the AS/400
adapter						line description (CRTLINTRN
address						command) and for the 5494
						Remote Controller Unit must
						match.
LAN	ADPTADR	15	-	-	-	Values specified for the AS/400
remote						CRTCTLAPPC command and
adapter						for the 5494 Remote Control
address						Unit must match.
Local	LCLLOCNAME	H1	1	-	-	Values specified for the AS/400
location						CRTCTLRWS command and
name						for the 5494 Remote Control
						Unit must match. This will
						probably match LCLLOCNAME
						in the network attributes. This
						value will probably match the
						LCLLOCNAME in the network
						attributes.
Link type	LINKTYPE	AA	-	*LAN	4	5494 configuration values must
						match the values specified for
						the LINKTYPE parameter on
						the CRTCTLAPPC command.
						For APPC controllers that
						specify LINKTYPE(*SDLC), the
						value specified in the 5494
						configuration must be
						compatible with the physical
						interface (INTERFACE
						parameter) specified on the
						CRTLINSDLC command.
						Select 4 for the network
						connections.
Remote	RMTCPNAME	13	-	-	-	Values specified for the AS/400
control						CRTCTLAPPC command and
point name						for the 5494 Remote Control
						Unit must match.
Remote	RMTNETID	11	3	-	-	Values specified for the AS/400
network						CRTCTLAPPC and
identifier						CRTCTLRWS commands and
						for the 5494 Remote Control
						Unit must match. This will
						probably match LCLNETID in
						the network attributes and
						H1:2.
Remote	RMTLOCNAME	12	-	-	-	Values specified for the AS/400
location						CRTCTLRWS command and
name						for the 5494 Remote Control
						Unit must match.

Example: Connecting an AS/400 to a 5494 controller connected by frame relay

Configuration parameters must be coordinated when you connect an AS/400 system to a 5494 controller.

Chapter 7. Communicating with remote workstation controllers 47