IBM manual AS/400 Prompt, Parameter, Macro

	AS/400
AS/400 Prompt	Parameter	4700 Macro	4700 Parameter
Connection	CNN	COMLINK	ACB
type			For SDLC finance communications, if the line is switched
			(CNN(*SWTPP) on the CRTLINSDLC command or
			SWITCHED(*YES) on the CRTCTLFNC command), include the
			SWM value on the ACB parameter (ACB = SWM).
Exchange	EXCHID	X25CKT	XID
identifier			The values specified for the 4700 and the AS/400 system must
			match. The block number for the 4700 (first 3 digits of the
			AS/400 EXCHID parameter) must be 057.
			The 4700 parameter values are decimal numbers; the AS/400
			values are hexadecimal.
X.25 link	LINKPCL	X25CKT	LLC
protocol			For X.25 finance communications, the LLC parameter must
			specify QLLC for the type of logical link control.
			LINKPCL(*QLLC) must also be specified on the AS/400
			CRTCTLFNC command.
Link type	LINKTYPE	COMLINK	TYPE
			4700 TYPE parameter must match the LINKTYPE parameter
			specified on the AS/400 CRTCTLFNC command.
			v If LINKTYPE(*SDLC), specify TYPE = 4502.
			v If LINKTYPE(*X25), specify TYPE = 1424.
Local location	LOCADR	STATION	ID
address			If the optional LUA parameter is not specified, the value
			specified for the 4700 ID parameter must match the value
			specified for the LOCADR parameter on the AS/400 create
			device description command. If LUA is specified, the LUA
			parameter value must match the LOCADR parameter.
			The 4700 parameter values are decimal numbers; the AS/400
			values are hexadecimal.

Chapter 7. Communicating with remote workstation controllers 63