Operator Panel

The Model F80 cabinet incorporates the operator panel and indicators for the system. The panel consists of the following features (see Figure 4):

Power On/Off Button

Power-on LED (Green)

System Attention LED (Yellow)

This LED indicates to a user that there is an attention condition on the system.

System Activity LEDs (Green)

These LEDs report the status of the integrated SCSI and Ethernet ports.

Operator Panel Display

The display has two lines of sixteen characters each. The display shows reference codes from the service processor, the SPCN, and the operating system. These codes can be either informational codes or error codes. Informational codes will have the System Attention LED off; error codes will have the System Attention LED on.

Service Processor Reset Button

The service processor reset button is a single execution button used to reset the service processor and bring the system back into standby mode. Access to this button is restricted by only having access to this button through a pinhole in the operator panel cover. This button is for service use only.

Speaker (beeper)

Figure 4. Operator Panel

IBM RS/6000 7025 Model F80 Server 5

Page 7
Image 7
IBM F80 manual Operator Panel