Increasing memory
1. Power off the computer an disconnect the AC Adapter and all
cables from the computer.
2. Close the LCD, turn the computer over, and then remove the
battery pack.
3. Loosen the screw and remove the memory slot cover.
4. Press out on the latches on both edges of the socket at the
same time.
5. Remove the DIMM.
Be sure to save the DIMM for future use.
6. Replace the memory slot cover; then tighten the screws.
7. Replace the battery pack.
8. Turn the computer over again; then connect the AC Adapter and
all the cables you disconnected.
Note: Base memory (32 MB or 64 MB) is internal and cannot be
upgraded.
Extending the features of your computer 55